Ten years, since 2004.

Contact Us |

Site map Page QR code Fanotec mobile
Fanotec
Pole Series TP, 1, 2 Guy Wire System CompleteProducts » Pole Accessories

Pole Series TP, 1, 2 Guy Wire System Complete

Overview Product Views

Pole Series TP, 1, 2 Guy Wire System Complete

Overview 
Pole Guy Wire System Complete. Will work with Travel Pole, Pole Series 1 and Pole Series 2.

Consists of:

  • 3ea. This is a 6m (19.7ft) long automatic rewinding stainless steel guy wire with lock, designed for use with Fanotec poles with maximum extension below 6m. Unlocked and the guy wire extends/reels in as pole is extended/collapsed. Locked and the guy wire can be tensioned by raising the pole further. Together with the pole support bearing, a set of three guy wires can substantially enhance stability of pole in strong winds and/or when the loading is near the recommended maximum. A single guy wire can be used as a support or safety measure for horizontal pole application or when using the pole upside down.
  • 1ea. This is the support bearing for the Pole. It allows you to attach guy wires to pole to aid in supporting it. The ball-bearing construction prevents attached wires from twisting while pole is being rotated. Together with three guy wires, it substantially enhances stability of pole in strong winds and/or when the loading is near the recommended maximum. With a single guy wire, it can be used as a support or safety measure for horizontal pole application or when using the pole upside down.

Note: The reels will be positioned very close to the ground. Please be careful when using around sand, dirt or water as this may affect functioning if reels get dirty or wet.


Product QR codeProduct QR code
Overview Product Views

© 2017 Fanotec | All rights reserved.