Fanotec Multi-cam Trigger safely splits a dual-channel input signal into four dual-channel outputs, splitting control input to multiple cameras. The on board double action switch allows you to use it as a standalone trigger or test camera array quickly.
Specifications
All 4 output ports are diode isolated, one camera will not affect another.
Compatible with cameras that use separate input pins for focus and shutter controls, eg Contax, Canon, Olympus, Hasselblad, Pentax, Nikon, Sigma and Sony.
Velcro strap for easy mounting to different devices.
2 input ports can be daisy-chained to allow tens or hundreds of cameras to be triggered at the same time.
All ports are equipped with ESD diodes to protect your cameras and controlling device from ESD damages.
All ports utilise a 3-pole 2.5mm female jack. A remote shutter release cable is required for each camera. An input cable with a 2.5mm plug is also needed, use F9980-1 for MECHA.
Cables sold separately.
Log in to write a Testimonial, or send us your Testimonial via the contact form
›‹ 
